Is this page helpful?

Verdin iMX8M Plus Mezzanine

Verdin iMX8M Plus Mezzanine

Verdin iMX8M Plus Mezzanine

(Double-Click to Zoom)

Getting Started

The Verdin iMX8M Plus Mezzanine is an add-on board for the Verdin Development Board that provides access to and allows the evaluation of the “Module-specific" interfaces and features of the Verdin iMX8M Plus SoM.

Please refer to the datasheet of the Verdin iMX8M Plus SoM for more information on “Module-specific" interfaces and features.

Please note, that the following interfaces/features of the product are not yet supported in software:

• 1x Low-speed Extension Header

• 1x USB 3.1 Gen 1 Type-A Host Connector (downstream for external peripherals)

• 1x USB 2.0 Type-C Client Connector (upstream for internal connection to the USB 2.0 OTG port of the Verdin Development Board)

• HDMI eARC

Recommendation for a first-time order

The Verdin iMX8M Plus Mezzanine should be added to the order if you are planning to order the following composition of components:

• Verdin iMX8M Plus module
• Verdin Development Board V1.1B or newer

All the products can be ordered online at Toradex Webshop

Having trouble?

Please contact our technical support. Various option of technical support are mentioned in the article below.

• Technical Support Channels

Features

Check the hardware features on the product page at toradex.cn:

• Verdin iMX8M Plus Mezzanine features

Datasheets

Verdin iMX8M Plus Mezzanine V1.0

Verdin iMX8M Plus Mezzanine V1.0 Datasheet

Design Resources

Design Data for Verdin iMX8M Plus Mezzanine V1.0

• Verdin iMX8M Plus Mezzanine Block Diagram
• Verdin iMX8M Plus Mezzanine Altium Project (Altium Designer Release 10)
• Verdin iMX8M Plus Mezzanine Board PDF Schematics
• Verdin iMX8M Plus Mezzanine Assembly Drawing
• Verdin iMX8M Plus Mezzanine Bill of Materials (BOM)

Verdin iMX8M Plus Mezzanine Mechanical Models

A basic 3D model for the Verdin iMX8M Plus Mezzanine can be downloaded here.

• Verdin iMX8M Plus Mezzanine V1.0 3D EASM Model

This is a SolidWorks CAD model. You can download the free eDrawings model viewer from SolidWorks here.

• Verdin iMX8M Plus Mezzanine V1.0 3D STEP Model

This is a generic STEP model that can be opened and modified in any 3D CAD.

• Verdin iMX8M Plus Mezzanine V1.0 3D PDF Model

This is a generic 3D pdf model that can be opened in Adobe Reader.

Verdin Specifications

• Verdin Family Specification

Design and Layout Guide

• Verdin Carrier Board Design Guide
• Layout Design Guide

Altium Designer

Compatible Products

• Verdin iMX8M Plus
• Verdin Development Board V1.1B or newer
• Capacitive Touch Display 10.1" LVDS (through Verdin DSI to LVDS adapter)

Revision History

Click to See the Product Numbering Scheme

Product Number (PID8) Format

The format of the 8-digits Product Number (PID8) is the following:

The below table describes the structure of the Product Number (PID8):

Field	Description
PPPP	4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.)
VV	2-digits number, indicating the Major and Minor Version (in that order)
AA	2-digits number, indicating the Assembly Variant

See the complete list of available combinations on the Revision History table of the corresponding product page.

Example

Product number (PID8): 00291100:

0029: Apalis iMX6D 512MB
11: Major Version 1, Minor Version 1, Version V1.1 in short
00: Assembly Variant A

A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.

0163 Verdin iMX8M Plus Mezzanine

Product #	Product Description	Changes from Previous Version	Release Date	PCN Document
01631000	Verdin iMX8M Plus Mezzanine V1.0A	Initial Release	Q4 2021

Errata

None