Skip to main content

Apalis Tegra Power Consumption

Overviewโ€‹

This is one of a series of posts about Toradex modules' power consumption measurements. This article provides information about the power consumption of Apalis T30 and Apalis TK1.

The Apalis Tegras's power consumption depends on the devices connected to it. Below are the power consumption results of several test cases, demonstrating realistic system configurations at various CPU loads.

info

The power consumption is subject to variation, depending on the specific demand of your application, for example, the load, CPU stress, connected peripherals, and temperature. In toradex.cn, our minimum and maximum power consumption estimation is based on the lowest idle power consumption and the highest power consumption values during maximum load on our tests.

Disclaimerโ€‹

Toradex tests its modules following internal protocols as a way of standardizing the results. The overall power consumption of each module depends on multiple factors, such as:

  • Environmental temperature
  • Particular Silicon Revision of the SoC
  • Versions of the Software Components installed on the module
  • Use cases

The following results were achieved by simulating an ideal scenario. Applications in different conditions may not achieve the exact same results. It is suggested that a customer measures its SoM's power consumption under its own particular use cases before designing hardware based on this data.

Testing Conditionsโ€‹

  • The tests were performed using 3 different modules of each model.
  • The provided data is the average of the results obtained for each module group.
  • All of the SoMs were heated up first (using a stress test) to simulate the conditions of a continuous use scenario.

0034 Apalis TK1 2GB V1.2Aโ€‹

Software version: To be determined

Resultsโ€‹

Test caseMean Power Consumption [W*]Max Power Consumption [W]
Idle3.063.36
Idle after 20 min3.313.48
Stress 1 core4.404.53
Stress 2 core5.205.49
Stress 3 core5.826.17
Stress 4 core6.867.04
Idle (Headless)2.442.68
Headless & Full stress5.946.48
Headless, Full stress and iperf3 ethernet6.657.30
Iperf3 ethernet & Full stress7.407.85
Glmark2 & Full stress8.1110.45
HD video & Full stress7.267.74
CPU burn - neo stress script4.955.25
Max stress: full stress, iperf3 ethernet and glmark8.4311.46
Suspend1.310.00
RTC after shutdown810 ยตW
RTC after power off26 ยตW
  • Unless explicitly mentioned

0034 Apalis TK1 2GB V1.3Aโ€‹

Software version: To be determined

Resultsโ€‹

Test CaseAverage [W]Maximum [W]
Idle2.763.01
Idle after 20 min2.753.03
Stress 1 core4.054.15
Stress 2 core4.664.97
Stress 3 core5.285.56
Stress 4 core6.166.28
Headless idle2.242.50
Headless full stress5.435.65
Iperf3 eth full stress6.356.44
Glmark2 full stress10.0613.41
HD video full stress7.187.29
CPU burn - neo stress script4.644.68
Max stress10.6413.70
Suspend1.041.06

Apalis T30 2GBโ€‹

caution

The power consumption test for Apalis T30 was done in the old format. The following results consider the usage of Ixora board and BSP 2.7

S.NoTest CasePowerPowerPowerPowerPower
CPU 2%One CPU 100%Two CPU 100%Three CPU 100%All CPU 100%
1Apalis T30 2GB V1.0C + Ixora Carrier Board V1.1A12.17V - 3.371W12.09V - 4.558W12.05V - 5.157W11.97V - 6.212W11.92V - 6.878W
1Apalis T30 2GB V1.0C + Ixora Carrier Board V1.1A + Resistive Touch Display 7" Parallel (Back-light at 100%)12.05V - 5.338W12.01V - 6.533W11.89V - 7.039W11.93V - 8.053W11.85V - 8.887W

Additional Resourcesโ€‹

Apalis TK1 Page and Datasheet: Apalis TK1

Apalis T30 Page and Datasheet: Apalis T30

Tegra Power Consumption post: Colibri Tegra Power Consumption

Specifications and Design Guides: Carrier Board Design Guides

Thermal Management in Toradex Modules: Thermal Management

How to Suspend Your Module Running Linux: Suspend/Resume (Linux)



Send Feedback!