Skip to main content

Colibri Evaluation Board

Colibri Evaluation Board

(Double-Click to Zoom)

Getting Started​

Recommendation for a first-time order​

Toradex recommends to order the following additional products for your fist-time order:


All the products can be ordered online at Toradex Webshop.

Getting started for the first time?​

For detailed step-by-step instructions about how to start with both, SoM and Carrier Board, please have a look at our step-by-step Getting-Started Guide:

Product-specific information for the Colibri Evaluation Board:

Having trouble?​

Please contact our technical support. Various option of technical support are mentioned in the article below.

Features​

I/O Support​

  • Up to 32 Bit External Bus
  • USB 2.0 (4x Host, 1x OTG, 1x Device )
  • I2C (4x)
  • SPI (4x)
  • UART (2x RS232, 1x RS422/485)
  • IrDA (1x)
  • PWM (4x)
  • GPIO (up to 158)
  • Analog Input (4x)
  • Ethernet (1x 10/100 Mbit)
  • SDIO/SD/MMC (1x 4 Bit)
  • CAN (1x)
  • LVDS (1x Single Channel)
  • HDMI (1x)
  • VGA (1x)
  • RGB (1x 24/18 Bit)
  • Resistive Touch (4/5-wire)
  • Camera Parallel Interface (1x)
  • Analog Audio Line in (1x)
  • Analog Audio Mic in (1x)
  • Analog Audio Headphone out (1x)
  • USB-to-RS232 Transceiver (1x)
  • RTC on Board (1x)
  • JTAG

Block Diagram​


* This is a module-specific feature and may not be supported by all the computer-on-modules in the Colibri family. For more details, refer to the datasheet of Colibri computer-on-modules

** The breakout/jumper area provides a flexible mechanism for changing the hardware configuration or signal routing for any external circuit

Datasheets​

Colibri Evaluation Board V3.2​

Colibri Evaluation Board V3.2 Datasheet

Archive​

Design Resources​

Design data Colibri Evaluation Board V3.2​

Design data Colibri Evaluation Board Archive​

Colibri Evaluation Board Mechanical Models​

A basic 3D model for the Colibri Evaluation Board can be downloaded here:

This is a SolidWorks CAD model. You can download the free eDrawings model viewer from SolidWorks here.

It is a generic STEP model that can be opened and modified in any 3D CAD.

It is a generic 3D pdf model that can be opened in Adobe Reader.

Design and Layout Guide​

Altium Designer​

Compatible Products​


[1] Capacitive Touch Adapter is required

Revision History​

Click to See the Product Numbering Scheme

Product Number (PID8) Format​

The format of the 8-digits Product Number (PID8) is the following:

Product Numbering Scheme

The below table describes the structure of the Product Number (PID8):

FieldDescription
PPPP4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.)
VV2-digits number, indicating the Major and Minor Version (in that order)
AA2-digits number, indicating the Assembly Variant

See the complete list of available combinations on the Revision History table of the corresponding product page.

Example​

Product number (PID8): 00291100:

0029: Apalis iMX6D 512MB11: Major Version 1, Minor Version 1, Version V1.1 in short00: Assembly Variant A

A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.

Colibri Evaluation Board​

PN: 0101

Product #Product DescriptionChanges from Previous VersionRelease DatePCN Document
01012102Colibri Evaluation Board V2.1CInitial Version2006PCN Colibri Evaluation Board V2.1C 2012-09-21
01013100Colibri Evaluation Board V3.1A- Rearranged many connectors
- Support for USB 2.0 HighSpeed
- Support for DVI-I
- Support for LVDS
- Support for RS422/485
- Changed CAN controller, using SPI now
- Removed PCMCIA interface (CF-Card)		2012-09-12Evaluation Product, No PCN
01013200Colibri Evaluation Board V3.2AImproved flexibility:
- Added jumper for CAN RX and TX
- Added jumper for Ethernet TX Center Tap
- Connected RTS and CTS of the debug serial port to the USB to Serial port (X27)
- Camera Interface connector X22 pin-out has been updated to be compatible with Apalis Evaluation Board

2014-11-30PCN Colibri Evaluation Board V3.2A 2016-06-03
01013201Colibri Evaluation Board V3.2B- Correction of Errata: Correct Audio Connector (X26) assembled
2016-03-11 

Errata​

Colibri Evaluation Board Errata



Send Feedback!