Resistive Touch Display 7" Parallel
Getting Started
This page contains basic information related to the Resistive Touch Display 7 Inch Parallel and is intended to be used as a single point of access for all information you need. Cables are included with the display and allow an easy connection to Toradex carrier boards supporting the Unified Display Interface.
Recommendation for a first-time order
For starting with the Resistive Touch Display 7" Parallel Toradex recommends the following products:
- With Apalis: Any Apalis iMX6 or Apalis T30 SoM plus the Apalis Evaluation Board.
- With Colibri: Any Colibri SoM plus the Colibri Evaluation Board.
All the products can be ordered online at Toradex Webshop.
First Steps
Please check the article below for all details on using the displays.
Having trouble?
Please contact our technical support. Various options of technical support are mentioned in the article below.
Features
Main Features
Resistive Touch Display 7" Parallel
- Resolution: 800x480px
- 18-bit RGB
- 4-Wire Resistive Touch
- 40 pin FFC cable to connect it with a Carrier Board
- No special drivers required
Datasheets
Datasheet
Resistive Touch Display 7 Inch Parallel - Datasheet
Mechanical Model
Compatible Products
- Apalis iMX6
- Apalis T30
- Colibri iMX6
- Colibri iMX6ULL
- Colibri iMX7
- Colibri iMX8X
- Colibri VF61
- Colibri VF50
- Colibri T30
- Colibri T20
- Colibri PXA320
- Colibri PXA310
- Colibri PXA270
- Apalis Evaluation Board
- Ixora Carrier Board
- Colibri Evaluation Board
- Aster Carrier Board
- Viola Carrier Board
- Iris Carrier Board
Revision History
Click to See the Product Numbering Scheme
Product Number (PID8) Format
The format of the 8-digits Product Number (PID8) is the following:
The below table describes the structure of the Product Number (PID8):
| Field | Description |
|---|---|
| PPPP | 4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.) |
| VV | 2-digits number, indicating the Major and Minor Version (in that order) |
| AA | 2-digits number, indicating the Assembly Variant |
See the complete list of available combinations on the Revision History table of the corresponding product page.
Example
Product number (PID8): 00291100:
0029: Apalis iMX6D 512MB11: Major Version 1, Minor Version 1, Version V1.1 in short
00: Assembly Variant A
A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.
1213xxxx - Resistive Touch Display 7 Inch Parallel
| Product # | Product Description | Changes from Previous Version | Release Date | PCN Document |
| 12131000 | Resistive Touch Display 7 Inch Parallel V1.0A | Initial Release | 2017-09-20 | PCN Resistive Touch Display 7" Parallel V1.0A 2019-04-05 |
| 12131001 | Resistive Touch Display 7 Inch Parallel V1.0B | Fix of the backlight issue (see Errata #1) | Q2 2019 |