Skip to main content

Verdin iMX8M Plus

NXP® i.MX 8M Plus Computer on Module Verdin iMX8M Plus

NXP® i.MX 8M Plus Computer on Module Verdin iMX8M Plus

(Double-Click to Zoom)

Getting Started

Verdin iMX8M Plus is a member of the Verdin Family. You will find all technical details such as features, datasheets, software, etc. here.

Recommendation for a first-time order

For starting for the first time with your Verdin iMX8M Plus you will need a suitable Verdin carrier board as well as some adapters and cables for connecting your desired interfaces.

Toradex recommends to order one of the following carrier boards for your first-time order:

Where do I buy this product?

You can buy the Verdin iMX8M Plus module, Dahlia Carrier Board and Verdin Development Board from the Toradex webshop.

Getting started for the first time?

For quickstart step-by-step instructions, please have a look at our step-by-step Quickstart Guide:

The Verdin iMX8M Plus comes with Toradex Easy Installer pre-installed. Once you power-on the board, it will display a list of available images to be installed. Check out how to get started with the Toradex Easy Installer:

Additional information

For information on how to re-flash an operating system or image on the computer on module please check the Toradex Easy Installer article:

We have quick video tutorials:

Having trouble?

Please contact our technical support. Various option of technical support are mentioned below:

Hardware

Check the hardware features on the product page in toradex.cn:

Software

Get details including free downloads of images and BSPs for operating systems supported by Verdin iMX8M Plus.

In-house development and support

The following Linux-based offerings are currently supported:

For detailed instructions about how to start developing your software for this Computer on Module, check out our software page.

Datasheets

Verdin iMX8M Plus V1.1

Verdin iMX8M Plus V1.1 datasheet

Verdin iMX8M Plus V1.0

Verdin iMX8M Plus V1.0 Datasheet

Verdin Specifications

Additional Resources

3D Models

Toradex provides two different 3D models for Verdin Systems on Module:

  • Generic Verdin 3D Mechanical Models: This model has the maximum component height for testing the mechanical fit. This ensures the mechanical design fits all current Verdin modules as well as future releases.
  • Specific Verdin 3D Mechanical Models: These models are simplified models of the respective Verdin module. They contain only the PCB and the CPU and are intended to be used for heat spreader or heat sink designs. The CPU height is a typical value. Due to production tolerances, the actual height of the assembled component can be different.

Generic Verdin 3D Mechanical Models

The generic Verdin 3D model contains the PCB and the maximum component height on top and bottom of modules from the Verdin Module Family. This model should be used to test the mechanical fit, ensuring that the mechanical design fits all current Verdin modules as well as future releases.

Verdin iMX8M Plus - Specific 3D Mechanical Models

The Verdin iMX8M Plus 3D model is simplified and contains only the PCB and the CPU. It is intended to be used for heat spreader or heat sink designs. The CPU height is a typical value. Due to production tolerances, the actual height of the assembled component can be different. Please use the Generic Verdin 3D Mechanical Models with the maximum component height for testing the mechanical fit. This ensures the mechanical design fits all current Verdin modules as well as future releases.

Carrier Boards

Off-the-shelf Carrier Boards

Custom Carrier Board Design

Find free reference designs, schematics, 3D designs and tools to build your carrier board easily in the link below:

Upverter

Upverter is an online carrier board design tool that simplifies carrier board design and software support at the BSP level. The tool is available on the Toradex developer website:

Accessories

[1] This product reached End-of-Life (EOL) and is not available for purchase anymore.

Revision History

Click to See the Product Numbering Scheme

Product Number (PID8) Format

The format of the 8-digits Product Number (PID8) is the following:

Product Numbering Scheme

The below table describes the structure of the Product Number (PID8):

FieldDescription
PPPP4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.)
VV2-digits number, indicating the Major and Minor Version (in that order)
AA2-digits number, indicating the Assembly Variant

See the complete list of available combinations on the Revision History table of the corresponding product page.

Example

Product number (PID8): 00291100:

0029: Apalis iMX6D 512MB
11: Major Version 1, Minor Version 1, Version V1.1 in short
00: Assembly Variant A

A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.

0070 Verdin iMX8M Plus Quad 8GB WB IT

Product #Product DescriptionChanges from Previous VersionRelease DateRelated Documents
00701100
Verdin iMX8M Plus Quad 8GB WB IT V1.1A
- Initial Release
- Based on the 00581100 Verdin iMX8M Plus Quad 4GB WB IT V1.1A (see the related revision history entry below)
- RAM capacity has been changed to 8GB (MT53E2G32D4DE-046 AIT:C)
- Temperature Sensor TMP1075DSGR assembled on SoM
Q3, 2023

Verdin Product Family Specification


0058 Verdin iMX8M Plus Quad 4GB WB IT

Product #Product DescriptionChanges from Previous VersionRelease DateRelated Documents
00581001
Verdin iMX8M Plus Quad 4GB WB IT V1.0B
Initial Release
Q2, 2020

Verdin Product Family Specification Update


00581002
Verdin iMX8M Plus Quad 4GB WB IT V1.0C
- Special development version with limited temperature range support (0°C to 70°C)
- Replace SoC: PIMX8ML8CVNKZAB with PIMX8ML8DVNLZAB
- Resolve the Bluetooth host interface strapping issue HAR-8341 (see the "Errata/Known issues" section for more details)
- Other minor improvements
Q3, 2021
PCN Verdin iMX8M Plus Quad 4GB WB IT V1.0C 2022-06-07
00581003
Verdin iMX8M Plus Quad 4GB WB IT V1.0D
- Regular version with full temperature range support (-40°C to +85°C)
- Replace SoC: PIMX8ML8DVNLZAB with MIMX8ML8CVNKZAB
Q3, 2021
PCN Verdin iMX8M Plus Quad 4GB WB IT V1.0D 2022-06-07
00581004
Verdin iMX8M Plus Quad 4GB WB IT V1.0E
- Replaced the eMMC MTFC16GAPALBH-IT with MTFC16GAPALBH-AAT (using the latter as a temporary solution for increasing the availability of the product)
Q1, 2022
PCN Verdin iMX8M Plus Quad 4GB WB IT V1.0E 2022-06-07
00581100
Verdin iMX8M Plus Quad 4GB WB IT V1.1A
- The PCB design has been updated
- The eMMC capacity has been increased from 16GB to 32GB
- The eMMC part Micron MTFC16GAPALBH-IT (2D MLC) has been replaced with the Kingston EMMC32G-IX29-8AC01 (3D TLC)
- The host controller interface of the Bluetooth module has been changed from SDIO to a full-featured UART interface (including flow control signals, served by the UART4 SoC interface)
- The functionality of the Verdin USB_1_ID pin (pin 161 of the edge connector) has been restored (resolves HAR-6503, see the "Errata/Known issues" section for more details)
- The ECSPI2 SoC pins have been eliminated from the Module-specific pins MSP_13, MSP_18, MSP_28, and MSP_33
- The SoC pins serving the Verdin USB_2_OC# (pin 187 of the edge connector) and CSI_1_MCLK (pin 91 of the edge connector) pins have been swapped (resolves HAR-6498, see the "Errata/Known issues" section for more details)
- The RX and TX signals of the I2S interface connected to the Bluetooth solution have been swapped on the SoC side (resolves HAR-6336, see the "Errata/Known issues" section for more details)
- An assembly option for a PCB temperature sensor has been added (not assembled)
- An assembly option for the ST ST33GTPMII2C TPM has been added (not assembled)
- The assembly option for the Microchip ATTPM20 TPM has been eliminated
- Other minor fixes and improvements
Q2 2022

Flash Memory Overview on Toradex Products

PCN Verdin iMX8M Plus Quad 4GB WB IT V1.1A 2023-11-27
00581101
Verdin iMX8M Plus Quad 4GB WB IT V1.1B
- The RAM part Micron MT53E1G32D2FW-046 IT:A has been replaced with the Micron MT53E1G32D2FW-046 IT:B.
- The previously not populated PCB temperature sensor assembly option has been assembled with the Texas Instruments TMP1075DSGR part.
Q1 2024

0063 Verdin iMX8M Plus Quad 4GB IT

Product #Product DescriptionChanges from Previous VersionRelease DateRelated Documents
00631100
Verdin iMX8M Plus Quad 4GB IT V1.1A
- Initial Release
- Based on the 00581100 Verdin iMX8M Plus Quad 4GB WB IT V1.1A (see the related revision history entry above)
- The Wi-Fi/Bluetooth solution has been eliminated
- The ECSPI2 SoC pins have been kept available on the Module-specific pins MSP_13, MSP_18, MSP_28, and MSP_33
Q2 2022

Flash Memory Overview on Toradex Products

PCN Verdin iMX8M Plus Quad 4GB IT V1.1A 2023-11-27
00631101
Verdin iMX8M Plus Quad 4GB IT V1.1B
- The RAM part Micron MT53E1G32D2FW-046 IT:A has been replaced with the Micron MT53E1G32D2FW-046 IT:B.
- The previously not populated PCB temperature sensor assembly option has been assembled with the Texas Instruments TMP1075DSGR part.
Q1 2024

0064 Verdin iMX8M Plus Quad 2GB WB IT

Product #Product DescriptionChanges from Previous VersionRelease DateRelated Documents
00641100
Verdin iMX8M Plus Quad 2GB WB IT V1.1A
- Initial Release
- Based on the 00581100 Verdin iMX8M Plus Quad 4GB WB IT V1.1A (see the related revision history entry above)
- Changed SoC part number to NXP MIMX8ML6CVNKZAB (quad core, ISP, VPU, CAN-FD, IT, no NPU, no audio DSP)
- RAM capacity has been changed to 2GB (MT53E512M32D1ZW-046 IT:B)
- eMMC capacity has been changed to 16GB (EMMC16G-IB29-90F01)
- Temperature Sensor TMP1075DSGR assembled on SoM
Q4 2023

Verdin Product Family Specification


0065 Verdin iMX8M Plus QuadLite 1GB IT

Product #Product DescriptionChanges from Previous VersionRelease DateRelated Documents
00651100
Verdin iMX8M Plus QuadLite 1GB IT V1.1A
-Initial Release
-Based on the 00631100 Verdin iMX8M Plus Quad 4GB WB IT V1.1A (see the related revision history entry above)
-Changed SoC part number to NXP MIMX8ML4CVNKZAB (quad core, no ISP, no VPU,no NPU, no audio DSP, CAN-FD, IT)
-RAM capacity has been changed to 1GB (MT53E256M32D2DS-046 IT:B)
-eMMC capacity has been changed to 8GB (MTFC8GAKAJCN-4M IT)
-Temperature Sensor TMP1075DSGR assembled on SoM
Q4 2023

0061 Verdin iMX8M Plus Quad 2GB (Obsolete)

Product #Product DescriptionChanges from Previous VersionRelease DateRelated Documents
00611001
Verdin iMX8M Plus Quad 2GB V1.0B
Initial Release, Obsolete
Q2, 2020

Verdin Product Family Specification Update

Errata/Known issues

SoC Errata

SoM Errata Documents

Verdin iMX8M Plus Errata

Hardware Errata/Known Issues

Migration in Progress

Issue trackers are not yet available in the new developer website. See it on the archived developer website.

Software Issue Tracker - Verdin iMX8M Plus



Send Feedback!