Skip to main content

Colibri PXA270

Marvell PXA270 Computer on Module - Colibri PXA270 - Front

(Double-Click to Zoom)

Getting Started​

caution

Please note that this Product is no longer available for purchase.

Colibri PXA270 is a member of the Colibri family. You will find all technical details such as features, datasheets, software, etc. here.

What do I need to order?​

You will need to order a suitable carrier board. We recommend you order the Colibri Evaluation Board for easy evaluation of Colibri interfaces.

Do I need anything else in addition?​

The Carrier Board Accessory Kit includes:

  • Cables: USB, Ethernet, RS232, Jumper Wires
  • Adapters: DVI to VGA, HDMI to DVI, USB to RS232, USB Micro-A to A (USB Micro-AB receptacle to Type A), RS232 Header to D-Sub, Iris Power-adapter
  • Power Adapter: 12VDC 30W with international plugs
  • Product Flyer with cable connection details

Where do I buy?​

You can buy the Colibri PXA270 module, Colibri Evaluation Board and Carrier Board Accessory Kit from the Toradex webshop.

Starting for the first time?​

The initial steps before starting your application development depends on the Carrier Board and Operating System, you would like to use along with the module. For all details, please check the article below to set up the module correctly.

We also have quick video tutorials.

For developing software on the platform, please get all the details below.

Having trouble?​

Please contact our technical support. Various option of technical support are mentioned in the article below.

Features​

Processor​

  • Marvell PXA270 - Intel XScale Arm (312/520MHz)
  • L1 Instruction cache = 32KB
  • L1 Data cache = 32KB

Memory​

  • 64MB SDRAM (32 Bit) RAM
  • 32MB NOR (32 Bit) Flash

Interfaces​

  • 32 Bit External Bus
  • USB 2.0 (1x Host, 1x OTG)
  • I2C (1x)
  • SPI (3x)
  • Compact Flash (1x)
  • UART (3x)
  • IrDA (1x)
  • PWM (4x)
  • GPIOs (up to 85)
  • Analog Input (4x 12 Bit)
  • Ethernet (1x 10/100 Mbit)
  • SDIO/SD/MMC (1x 4 Bit)
  • RGB (1024x768x18bpp)
  • Resistive Touch (4/5-wire)
  • Camera Parallel Interface (1x)
  • Analog Audio Line in (Stereo)
  • Analog Audio Mic in (Mono)
  • Analog Audio Headphone out (Stereo)

Supported operating systems​

Datasheets​

Module's Datasheet​

Colibri PXA270 Datasheet

Technical Manuals​

3rd Party Components' Datasheets​

Additional Resources​

Software​

Get details including free downloads of images and BSPs for operating systems supported by Colibri PXA270

In-house development and support​

3D Models​

General Colibri 3D Mechanical Models​

The basic Colibri 3D model contains the PCB and the maximum component height on top and bottom of the module.

This is a SolidWorks CAD model. You can download the free eDrawings model viewer from SolidWorks here.This is a generic STEP model that can be opened and modified in any 3D CAD.This is a generic 3D pdf model that can be opened in Adobe Reader.

Carrier Boards​

Off-the-shelf Carrier Boards​

From Toradex​

From Partners​

Custom Carrier Board Design​

Find free reference designs, schematics, 3D designs and tools to build your carrier board easily in the link below.

Accessories​

Revision History​

Colibri PXA270 312MHz​

Product #Product DescriptionChanges from Previous VersionRelease DatePCN Document
00011000Colibri PXA270 312MHz V1.0AInitial Release
PMIC: MAX1587
NOR Flash: J3
WinCE license label: V5.0
SODIMM: 2.5V (DDR1) and 1.8V (DDR2) keying
2005-05-16Β 
00011001Colibri PXA270 312MHz V1.0BRoHS compliancy2005-08-30Β 
00011002Colibri PXA270 312MHz V1.0CChanges in the audio supply
SODIMM: 2.5V keying (DDR1) only
2005-12-27Β 
00011003Colibri PXA270 312MHz V1.0DChanged series resistor value2006-04-05
(reworked V1.0c)
Β 
00011200Colibri PXA270 312MHz V1.2APMIC: TPS65020
GPIO`50` is muxed with UIOΒ 
Reset is generated by VBat
VRTC is switched by PMIC
2006-10-07Β 
00011202Colibri PXA270 312MHz V1.2CNOR Flash: P302006-09-25Β 
00011203Colibri PXA270 312MHz V1.2DNOR Flash: J3
WinCE license label: V6.0
2007-08-04PCN Colibri PXA270 312MHz V1.2D 2010-09-14
00082100Colibri PXA270 312MHz V2.1ANOR Flash: Numonyx StrataFlash P33
Audio: Wolfson WM9715L replaced NXP UCB1400
SODIMM pin 95 can be used as RDY signal
2010-05-25PCN Colibri PXA270 312MHz V2.1A 2010-09-14
00082201Colibri PXA270 312MHz V2.2BChanged Ethernet CS pull-up from 100k to 22k PCB optimizations for production2010-09-14PCN Colibri PXA270 312MHz V2.2B 2012-05-25
00082400Colibri PXA270 312MHz V2.4AChanged from PXA270 stepping C0 to PXA270M stepping A1
Optimized power-up circuit for shorter reset time
2012-05-25PCN Colibri PXA270 312MHz V2.4A 2015-03-30
00082402Colibri PXA270 312MHz V2.4CUsing Etron SDRAM instead of Fidelix SDRAM
Validated Wolfson WM9712L as a drop-in replacement for Wolfson WM9715L audio codec
2015-04-30

Colibri PXA270 520MHz​

Product #Product DescriptionChanges from Previous VersionRelease DatePCN Document
00021000Colibri PXA270 520MHz V1.0AInitial Release
PMIC: MAX1587
NOR Flash: J3
WinCE license label: V5.0
SODIMM: 2.5V (DDR1) and 1.8V (DDR2) keying
2005-05-16Β 
00021001Colibri PXA270 520MHz V1.0BRoHS compliancy2005-08-30Β 
00021002Colibri PXA270 520MHz V1.0CChanges in the audio supply
SODIMM: 2.5V keying (DDR1) only
2005-12-27Β 
00021003Colibri PXA270 520MHz V1.0DChanged series resistor value2006-04-05
(reworked V1.0c)
Β 
00021200Colibri PXA270 520MHz V1.2APMIC: TPS65020
GPIO`50` is muxed with UIO
Reset is generated by VBat
VRTC is switched by PMIC
2006-10-07Β 
00021201Colibri PXA270 520MHz V1.2BΒ No releaseΒ 
00021202Colibri PXA270 520MHz V1.2CP30 Flash (32MB)2006-09-25Β 
00021203Colibri PXA270 520MHz V1.2DNOR Flash: J3
WinCE license label: V6.0
2007-08-04PCN Colibri PXA270 520MHz V1.2D 2010-09-14
00092100Colibri PXA270 520MHz V2.1ANOR Flash: Numonyx StrataFlash P33
Audio: Wolfson WM9715L replaced NXP UCB1400
SODIMM pin 95 can be used as RDY signal
2010-05-25PCN Colibri PXA270 520MHz V2.1A 2010-09-14
00092201Colibri PXA270 520MHz V2.2BPCB optimizations for production
Changed Ethernet CS pull-up from 100k to 22k
Processor: PXA270
2010-09-14PCN Colibri PXA270 520MHz V2.2B 2012-05-25
00092400Colibri PXA270 520MHz V2.4AChanged from PXA270 stepping C0 to PXA270M stepping A1
Optimized power-up circuit for shorter reset time
2012-05-25PCN Colibri PXA270 520MHz V2.4A 2015-03-30
00092402Colibri PXA270 520MHz V2.4CUsing Etron SDRAM instead of Fidelix SDRAM
Validated Wolfson WM9712L as a drop-in replacement for Wolfson WM9715L audio codec
2015-04-30

Errata​

None



Send Feedback!