Search by Tags

Compatibility overview (Robin)

 
Applicable for


Article updated at 25 Sep 2012

The Robin modules are compatible with the Daisy and Lily as well with the thermal solutions, but there may be implications if combining the products for a specific application. Those points are stated in the next table.

Robin V1.0
PCB thickness 1.6mm
COMExpress: SDIO_Slot0
FFC: GPIO and SDIO_Slot2
Robin V2.0
PCB thickness 2.0mm
COMExpress: SDIO_Slot0 or GPIO
FFC: GPIO and SDIO_Slot2
Heatsink V1.0
-M2.5x12mm screws and nuts included
-height: 12mm
Heatspreader V1.0a
-No screws included
-height: 11.4mm
Heatspreader V1.0b
-M2.5x12mm screws and nuts included
-height: 11.4mm
Heatsink V1.0
-M2.5x12mm screws and nuts included
-height: 12mm
Heatspreader V1.0a
-No screws included
-height: 11.4mm
Heatspreader V1.0b
-M2.5x12mm screws and nuts included
-height: 11.4mm
Daisy V1.0/V1.1
-Standoff M2.5
USB 7 (client) routed to MicroUSB
-MicroSD from ComExpress_SDIO
-GPIO from FFC_GPIO
-COMExpress Video:
--LVDS to JILI
--VGA to VGA
--150R on TV Out
-FFC cable needed for GPIOs -M2.5x12 screws needed
-FFC cable needed for GPIOs
-FFC cable needed for GPIOs -FFC cable needed for GPIOs -Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-M2.5x12 screws needed
-FFC cable needed for GPIOs
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-FFC cable needed for GPIOs
Lily V1.0/V1.1 Nano
-No Standoff
USB 7 (client) routed to a Header
-SD from FFC_SDIO_Slot2
-GPIO from ComExpress_GPIO
-COMExpress Video:
--LVDS to DVI-D
--VGA to DVI-A
--no 150R on TV Out
-150R on TV Out needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-USB client on Header
-150R on TV Out needed
-GPIOs only on Modules FFC
-M2.5x12 screws needed
-FFC cable needed for
SD slot on carrierboard
-USB client on Header
-150R on TV Out needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-USB client on Header
-150R on TV Out needed
-FFC cabled needed for
SD slot on carrierboard
-USB client on Header
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-150R on TV Out needed
-M2.5x12 screws needed
-FFC cable needed for
SD slot on carrierboard
-USB client on Header
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-150R on TV Out needed
-FFC cable needed for
SD slot on carrierboard
-USB client on Header
Lily V2.0a/V2.0b Nano
-Standoff M3
USB 7 (client) routed to Type B
-SD from FFC_SDIO_Slot2
-GPIO from ComExpress_GPIO
-COMExpress Video:
--LVDS to 2mm Header
--VGA to DVI-A
--no 150R on TV Out
-150R on TV Out needed
-M2.5x20 screws needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-M2.5x22 screws and nuts needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-M2.5x22 screws needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-M2.5x20 screws needed
-FFC cable needed for
SD slot on carrierboard
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-150R on TV Out needed
-M2.5x22 screws and nuts needed
-FFC cable needed for
SD slot on carrierboard
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-150R on TV Out needed
-M2.5x22 screws needed
-FFC cable needed for
SD slot on carrierboard
Lily V2.0c Nano
-Standoff M2.5
USB 7 (client) routed to Type B
-SD from FFC_SDIO_Slot2
-GPIO from ComExpress_GPIO
-COMExpress Video:
--LVDS to 2mm Header
--VGA to DVI-A
--no 150R on TV Out
-150R on TV Out needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-FFC cable needed for
SD slot on carrierboard
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-150R on TV Out needed
-M2.5x22 screws and nuts needed
-FFC cable needed for
SD slot on carrierboard
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-150R on TV Out needed
-M2.5x22 screws needed
-FFC cable needed for
SD slot on carrierboard
Lily V2.1 Nano
-Standoff M2.5
USB 7 (client) routed to Type B
-SD from FFC_SDIO_Slot2
-GPIO from ComExpress_GPIO
-COMExpress Video:
--LVDS to JILI
--VGA to DVI-A
--no 150R on TV Out
-150R on TV Out needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-GPIOs only on Modules FFC
-M2.5x12 screws needed
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-GPIOs only on Modules FFC
-FFC cable needed for
SD slot on carrierboard
-150R on TV Out needed
-FFC cable needed for
SD slot on carrierboard
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-150R on TV Out needed
-M2.5x12 screws needed
-FFC cable needed for
SD slot on carrierboard
-Module + Heatspreader
height: 13.40mm within
tolerance of COM.0 spec.
-150R on TV Out needed
-FFC cable needed for
SD slot on carrierboard